Connecticut PFAS July 1, 2026: Label + Notify, Not a Ban

Connecticut's next PFAS deadline is 19 days away as this is published. On July 1, 2026, twelve consumer product categories containing intentionally added PFAS (per- and polyfluoroalkyl substances) face a new requirement under Public Act 24-59 (CGS 22a-903a et seq.). Most of the coverage you will read calls it a ban. It is not — and that distinction is the whole point of this page, because the right response to a labeling rule is very different from the right response to a ban.

From July 1, 2026, products in the covered categories with intentionally added PFAS may only be sold in Connecticut if two things are true: the product is labeled, and the manufacturer has notified the Connecticut Department of Energy and Environmental Protection (CT DEEP) via the PFAS Reporting Form. Both. A label without the DEEP notification does not get you compliant, and neither does a notification without the label.

That means a compliant PFAS-containing product can stay on Connecticut shelves after July 1. Nothing gets pulled — yet. The actual ban on these categories takes effect January 1, 2028. If you have read elsewhere that Connecticut "bans PFAS in cookware this July," that is a conflation of the 2026 and 2028 steps.

The label-and-notify requirement applies to products with intentionally added PFAS in: apparel, carpets and rugs, cleaning products, cookware, cosmetics, dental floss, fabric treatments, juvenile products, menstruation products, textile furnishings, ski wax, and upholstered furniture.

If you sell in any of these categories and ship to Connecticut, this deadline is yours — whether you are the brand owner, a private-label seller, or an importer standing in the manufacturer's shoes.

The label. CT DEEP's approved wordings include "Contains PFAS" and "Made with PFAS chemicals," among other DEEP-approved language. Any approved phrasing satisfies the labeling half of the obligation.

The notification. The manufacturer notifies CT DEEP using the PFAS Reporting Form. This is the half sellers most often miss, because it lives with the agency rather than on the product.

If your products contain no intentionally added PFAS, neither step applies — but you want that fact documented from your supplier rather than assumed, which is where the supplier-declaration work below comes in.

A separate step of the same act has been live since January 1, 2026: outdoor apparel for severe wet conditions must carry a "Made with PFAS chemicals" disclosure, and firefighter turnout gear requires written notice. If you sell technical rainwear into Connecticut, that obligation predates July and applies today.

On January 1, 2028, Connecticut moves to a full manufacture, sale, and distribution ban covering the twelve categories plus severe-wet outdoor apparel and turnout gear. Read strategically, the July 2026 step is the state handing you 18 months of runway. Labeling and notifying keeps your current inventory sellable while you do the slower work: pressing suppliers for PFAS-free alternatives, reformulating, requalifying materials, or deciding to exit the category in Connecticut before 2028. Sellers who treat July 1 as the finish line risk arriving at the real deadline in 2028 with no plan. Sellers who treat it as the starting gun give themselves 18 months to find one.

Marketplace and FBA sellers rarely control which state a unit ships to, and carving Connecticut-only labeling into a national listing is impractical. That leaves two realistic paths. One: comply at the strictest standard — label and notify as if every unit could land in Connecticut, which also does the diligence work that every other state regime turns on: establishing your intentionally-added status in writing. Be clear about the limit, though — the label itself only satisfies Connecticut. The same PFAS-containing cookware is already banned outright in Minnesota and Maine, whatever its label says; the state-by-state map shows where each obligation type applies. Two: exclude Connecticut from your shipping destinations for affected SKUs. Note that Connecticut is not the only live obligation this year — Minnesota's reporting deadline is covered on our Minnesota PFAS page — so a strictest-standard approach often pays for itself across states.

Connecticut's law — like every state law covered in these guides — keys on intentionally added PFAS: substances put into the product or a component on purpose to provide a function. Your compliance position therefore rests on what your supplier can state in writing. Ask for a declaration that addresses intentionally added PFAS by name, not a generic "compliant" assurance. Our guide to PFAS questions for your supplier gives you the exact asks, and how to verify a supplier test report covers checking the paperwork that comes back. For material-level context, see resin and material verification with TDS documents.

To see in minutes whether this deadline — or any other state's — applies to your catalog, run your product categories and states through the free Deadline Checker.

Is Connecticut banning PFAS products on July 1, 2026?

No. July 1, 2026 is a label-and-notify deadline: products in the 12 covered categories with intentionally added PFAS may still be sold in Connecticut if they carry the required label and the manufacturer has notified CT DEEP. The full ban on these categories arrives January 1, 2028.

What label wording does Connecticut require?

CT DEEP's approved wordings include 'Contains PFAS' and 'Made with PFAS chemicals,' among other DEEP-approved language. Labeling alone is not enough — the manufacturer must also notify CT DEEP through the PFAS Reporting Form.

Which product categories does the July 2026 requirement cover?

Twelve categories: apparel, carpets and rugs, cleaning products, cookware, cosmetics, dental floss, fabric treatments, juvenile products, menstruation products, textile furnishings, ski wax, and upholstered furniture. Severe-wet outdoor apparel and firefighter turnout gear are handled separately, with a disclosure requirement in force since January 1, 2026.

What should marketplace sellers do if they sell nationwide?

You generally have two practical options: comply at the strictest applicable standard so every unit you ship is Connecticut-ready, or exclude Connecticut from your shipping destinations. Geo-fencing shelf space on marketplaces is difficult, so most sellers end up choosing one of those two paths.

What does 'intentionally added' PFAS mean for my supplier conversations?

It means PFAS that was deliberately added to the product or a component to provide a function — that is the standard Connecticut's law keys on. Ask suppliers to declare in writing whether any PFAS is intentionally added, and back that declaration with test documentation where you can.